Welcome to Wineruels!
Crushing grapes. Crushers used for crushing TP-20-50 performance GTGT respectively 15-20 and 40-50 t / h The first crusher - combined, has a double roller mechanism, the apparatus for the separation of the ridges and the piston pump mezgovoy. Crushing grapes in the crusher after the separation occurs when the crests of white grape processing, the apparatus for the separation of the ridges off Grinder A GTR imee 50 grams in two versions. The first of them a capacity of 40 t / h Department of ridges occurs after crushing grapes in the crusher chetyrehvalkovoy It has three separate units: the crusher, destemmer and the pump. In the second modification of the crusher capacity of 50 t / h of ridges separated by crushing grapes pered This increases the degree of crushing grapes, reducing moisture ridges, reducing the degree of enrichment of wort solids. Getting the drift-wort. To separate the drift in the practice are mainly screw stekateli Static-dynamic type, in which the static draining the wort into the receiving hopper is combined with a dynamic impact on the pulp with the help of the screw at the plants found in the old design changes that allow the wort to get higher quality and new high Screw stekatel 600-12 VPND old design productivity of 15-20 t / h with a frequency of 2.5 vrasheniya screw - 4.5 rev / min and a screw diameter of 600 mm equipped with a hydraulic device for humidity control pomace. The output quality of wort gravity flow gave 50-55 / t